• 12a A/C Cool Refrigerant

    emzone 12a A/C Cool Refrigerant is an environmentally friendly replacement alternative for ozone depleting R-12 and global warming R134a products. It is non-toxic and non-ozone depleting. The 12a A/C Cool Refrigerant also contains high performance oil to improve system efficiency and Universal UV Dye to help with leak detection.

    ITEM NUMBER   45850 PRODUCT SIZE   284 g / 10 oz UPC NUMBER    0 60480 45850 0
    emzone® A/C COOL REFRIGERANT has been formulated to be a replacement for R134a and R12 substitutes in car, truck, tractor and boat A/C systems. DIRECTIONS: 1. Unscrew and remove trigger with hose from top of can. 2. Then remove white plastic safety seal from base of trigger and discard. 3. Re-install trigger on top of can by rotating in clockwise direction. 4. The base of the trigger will puncture the top of can and refrigerant can now be installed. 5. Connect charging hose to low side pressure service port and invert can. 6. With compressor off, install minimum charge. 7. After minimum charge is achieved, start compressor and turn system to maximum. 8. Add additional 12a as required to correct pressure. Do not overcharge system. 9. Remove charging hose and check system for leaks. 10. Apply 12a Refrigerant label on A/C system in visible area near service port. Review regulations in your area. Recover any existing refrigerant into appropriate container. Do not mix refrigerants. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY.
    Download English SDS
    Download French SDS
  • A/C Cool Refrigerant - ReFill

    emzone 12a A/C Cool Refrigerant Refill is an environmentally friendly replacement alternative for ozone depleting R-12 and global warming R134a products. It is non-toxic and non-ozone depleting. The 12a A/C Cool Refrigerant also contains high performance oil to improve system efficiency and Universal UV Dye to help with leak detection.

    ITEM NUMBER   45849 PRODUCT SIZE   284 g / 10 oz UPC NUMBER     0 60480 45849 0
    emzone® A/C COOL REFRIGERANT has been formulated to be a replacement for R134a and R12 substitutes in car, truck, tractor and boat A/C systems. DIRECTIONS: 1. To be used with A/C Cool 12a Refrigerant hose with trigger. 2. Remove white plastic safety seal from base of trigger and discard (if applicable). 3. Re-install trigger on top of can by rotating in clockwise direction. 4. The base of the trigger will puncture the top of can and refrigerant can now be installed. 5. Connect charging hose to low side pressure service port and invert can. 6. With compressor off, install minimum charge. 7. After minimum charge is achieved, start compressor and turn system to maximum. 8. Add additional 12a as required to correct pressure. Do not overcharge system. 9. Remove charging hose and check system for leaks. 10. Apply 12a Refrigerant label on A/C system in visible area near service port. Review regulations in your area. Recover any existing refrigerant into appropriate container. Do not mix refrigerants. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY.
    Download English SDS
    Download French SDS
  • 12a A/C Cool Refrigerant

    emzone 12a A/C Cool Refrigerant is an environmentally friendly replacement alternative for ozone depleting R-12 and global warming R134a products. It is non-toxic and non-ozone depleting. The 12a A/C Cool Refrigerant also contains high performance oil to improve system efficiency and Universal UV Dye to help with leak detection. A/C 12a Equivalent Chart

    ITEM NUMBER   45851 PRODUCT SIZE    170 g / 6 oz UPC NUMBER   060480 458517
    emzone® A/C COOL REFRIGERANT has been formulated to be a replacement for R134a and R12 substitutes in car, truck, tractor and boat A/C systems. DIRECTIONS: Review regulations in your area. Recover any existing refrigerant into appropriate container. Do not mix refrigerants. 1. Connect tap end of charging hose to can. 2. Connect charging hose to low side pressure service port and invert can. 3. With compressor off, install minimum charge of liquid by tapping valve. 4. After minimum charge is achieved, start compressor and turn system  to maximum. 5. Add additional 12a as required to correct pressure. Do not overcharge  system. 6. Remove charging hose and check system for leaks. 7. Apply 12a Refrigerant label on A/C system in visible area near service port. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 12a A/C Oil Charge

    emzone 12a A/C Oil Charge is a universal lubricant and conditioner designed to reduce friction, replace lost oil due to leaks, and increase compressor life. It is safe for all systems and will not clog or restrict flow. A/C 12a Equivalent Chart

    ITEM NUMBER   45852 PRODUCT SIZE   114 g / 4 oz UPC NUMBER   060480 458524
    emzone® A/C OIL CHARGE has been formulated as a Universal Oil Lubricant for A/C systems. Improves compressor life and performance. DIRECTIONS: A/C System should be sufficiently charged and compressor engaged before installing product. 1. Shake can well. 2. Connect tap end of recharge hose to can. 3. Connect recharge hose to low side pressure service port. 4. Start engine and turn A/C to maximum cooling. 5. Ensure compressor is running and invert can. 6. Open valve of recharge hose and install contents into A/C system. 7. Remove recharge hose and check system for leaks. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 12a A/C Dryer

    emzone 12a A/C Dryer contains a moisture removing additive that converts moisture in the A/C system into synthetic oil and helps remove contaminants. We recommend the use of emzone 12a A/C Dryer prior to the use of emzone 12a A/C Stop Leak or A/C System Conditioner. This will help ensure all moisture has been removed from the air conditioning system. A/C 12a Equivalent Chart

    ITEM NUMBER   45854 PRODUCT SIZE   114 g / 4 oz UPC NUMBER   060480 458548
    emzone® A/C DRYER has been formulated to remove harmful moisture that can cause damage to A/C systems. This can occur as the result of a system leak. DIRECTIONS: A/C System should be sufficiently charged and compressor engaged before installing product. 1. Shake can well. 2. Connect tap end of recharge hose to can. 3. Connect recharge hose to low side pressure service port. 4. Start engine and turn A/C to maximum cooling. 5. Ensure compressor is running and invert can. 6. Open valve of recharge hose and install contents into A/C system. 7. Remove recharge hose and check system for leaks. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 12A A/C Dye Charge

    A/C Dye Charge is a perfect tool for visually detecting small AC leaks. It quickly finds the exact source of each and every leak instantly. Dye can remain in systems indefinitely and leaks can be searched while system is off or running. Contains 12a. A/C 12a Equivalent Chart

    ITEM NUMBER   45853 PRODUCT SIZE   114 g / 4 oz UPC NUMBER   060480 458531
    emzone® A/C DYE CHARGE has been formulated to help find leaks in Rubber, O-Rings and metal components of A/C systems. DIRECTIONS: A/C System should be sufficiently charged and compressor engaged before installing product. 1. Shake can well. 2. Connect tap end of recharge hose to can. 3. Connect recharge hose to low side pressure service port. 4. Start engine and turn A/C to maximum cooling. 5. Ensure compressor is running and invert can. 6. Open valve of recharge hose and install contents into A/C system. 7. Remove recharge hose and check system for leaks. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 12a A/C System Conditioner

    emzone 12a A/C System Conditioner repairs and conditions rubber parts including O-ring seals and gasket joints. It also improves system efficiency and helps prevents leaks in these areas. The 12a A/C System Conditioner is safe for all systems and will not clog or restrict flow. A/C 12a Equivalent Chart

    ITEM NUMBER   45855 PRODUCT SIZE   114 g / 4 oz UPC NUMBER   060480 458555
    emzone® A/C LEAK REPAIR has been formulated to repair and condition rubber parts and seals including o-rings. DIRECTIONS: A/C System should be sufficiently charged and compressor engaged before installing product. 1. Shake can well. 2. Connect tap end of recharge hose to can. 3. Connect recharge hose to low side pressure service port. 4. Start engine and turn A/C to maximum cooling. 5. Ensure compressor is running and invert can. 6. Open valve of recharge hose and install contents into A/C system. 7. Remove recharge hose and check system for leaks. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 12a A/C Stop Leak

    emzone 12a A/C Stop Leak seals leaks permanently in metal and rubber parts, including evaporators, condensers, driers, O-rings, and gasket joints. It also improves system efficiency and prevents future leaks. The emzone 12a A/C Stop Leak is safe for all systems and will not clog or restrict flow. The 114 g can contains sufficient stop leak to stop minor leaks in 2 lb. to 5 lb. A/C systems. A/C 12a Equivalent Chart

    ITEM NUMBER   45856 PRODUCT SIZE   114 g / 4 oz UPC NUMBER   060480 458562
    emzone® A/C STOP LEAK has been formulated to quickly seal leaks in metal components including condensers, evaporators and hoses. DIRECTIONS: A/C System should be sufficiently charged and compressor engaged before installing product. 1. Shake can well. 2. Connect tap end of recharge hose to can. 3. Connect recharge hose to low side pressure service port. 4. Start engine and turn A/C to maximum cooling. 5. Ensure compressor is running and invert can. 6. Open valve of recharge hose and install contents into A/C system. 7. Remove recharge hose and check system for leaks. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 12a A/C All-In-One

    emzone 12a A/C All-In-One is a multi-purpose product containing: UV Dye for leak detection, Oil Charge universal lubricant, and System Conditioner for O-ring seals. It also helps detect leaks, lubricate A/C systems and repair leaks in O-rings and gasket joints and is system safe. A/C 12a Equivalent Chart

    ITEM NUMBER   45857 PRODUCT SIZE   114 g / 4 oz UPC NUMBER   060480 458579
    emzone® A/C TUNE UP offers complete convenience with a 12a refrigerant, system conditioner, universal oil and UV dye. DIRECTIONS: A/C System should be sufficiently charged and compressor engaged before installing product. 1. Shake can well. 2. Connect tap end of recharge hose to can. 3. Connect recharge hose to low side pressure service port. 4. Start engine and turn A/C to maximum cooling. 5. Ensure compressor is running and invert can. 6. Open valve of recharge hose and install contents into A/C system. 7. Remove recharge hose and check system for leaks. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 1234yf Replacement A/C Cool Refrigerant

    emzone 1234yf Replacement Refrigerant is an environmentally friendly replacement product for use with new 1234yf systems. High performance. Nontoxic, non-ozone depleting and system safe.

    ITEM NUMBER   45830 PRODUCT SIZE   170 g / 6 oz UPC NUMBER   060480 458302
    emzone® A/C COOL REFRIGERANT has been formulated to be a replacement for 1234yf in car, truck, tractor and boat A/C systems. DIRECTIONS: Review regulations in your area. Recover any existing refrigerant into appropriate container. Do not mix refrigerants. 1. Connect tap end of charging hose to can. 2. Connect charging hose to low side pressure service port and invert can. 3. With compressor off, install minimum charge of liquid by tapping valve. 4. After minimum charge is achieved, start compressor and turn system  to maximum. 5. Add additional 1234yf replacement as required to correct pressure. Do  not overcharge system. 6. Remove charging hose and check system for leaks. 7. Apply 1234yf replacement label on A/C system in visible area near service port. See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY
    Download English SDS
    Download French SDS
  • 1/2" Valve Recharge Hose (Brass) - 13" / 33cm

    The heavy duty Recharge Hose is suitable for all emzone Refrigerant, Stop Leak and associated products. The durable brass connectors ensure a safe and secure fit and includes R134a quick connect. Compatible with R-12 adaptors and A/C Retrofit Conversion Fittings (sold separately). *Available in bulk without packaging – Item no. 45712  

    ITEM NUMBER   45713
    PRODUCT SIZE   1/2” Tap
    UPC NUMBER   060480 457138
    IMPORTANT: Always wear safety eyewear when servicing your air conditioning system. USE ONLY on low side service port. DO NOT CONNECT to high side service port of system as this could result in serious injury. Instructions: 1. Always connect to low side service port. 2. Refer to can for further instructions before using. 3. Connect tap end of hose to can and attach connector end to low side service port. 4. Ensure a secure fit at both ends of hose. 5. Turn hose tap clockwise to puncture top. 6. Turn hose tap counter-clockwise to begin flow of refrigerant. 7. Remove hose when finished and replace blue protective cap on service port.
  • 1/2" Valve Recharge Hose (Brass) - 13" / 33cm Bulk

    The heavy duty Recharge Hose is suitable for all emzone Refrigerant, Stop Leak and associated products. The durable brass connectors ensure a safe and secure fit and includes R134a quick connect. Compatible with R-12 adaptors and A/C Retrofit Conversion Fittings (sold separately).  

    ITEM NUMBER   45712
    PRODUCT SIZE   1/2” Tap
    UPC NUMBER   060480 457121
    IMPORTANT: Always wear safety eyewear when servicing your air conditioning system. USE ONLY on low side service port. DO NOT CONNECT to high side service port of system as this could result in serious injury. Instructions: 1. Always connect to low side service port. 2. Refer to can for further instructions before using. 3. Connect tap end of hose to can and attach connector end to low side service port. 4. Ensure a secure fit at both ends of hose. 5. Turn hose tap clockwise to puncture top. 6. Turn hose tap counter-clockwise to begin flow of refrigerant. 7. Remove hose when finished and replace blue protective cap on service port.
  • 1/2" Valve Recharge Hose w Gauge - 13" / 33 cm

    The heavy duty Recharge Hose with Pressure Gauge is suitable for all emzone Refrigerant, Stop Leak and associated products. Use to determine current pressure status of A/C system and ensure accuracy when recharging. The durable brass connectors ensure a safe and secure fit. Includes R134a quick connect. Compatible with R-12 adaptors and A/C Retrofit Conversion Fittings (sold separately). *Available in bulk without packaging – Item no. 45714

    ITEM NUMBER   45715
    PRODUCT SIZE   1/2” Tap
    UPC NUMBER   060480 457152
    IMPORTANT: Always wear safety eyewear when servicing your air conditioning system. USE ONLY on low side service port. DO NOT CONNECT to high side service port of system as this could result in serious injury. Instructions: 1. Always connect to low side service port. 2. Refer to can for further instructions before using. 3. Connect tap end of hose to can and attach connector end to low side service port. 4. Ensure a secure fit at both ends of hose. 5. Turn hose tap clockwise to puncture top. 6. Turn hose tap counter-clockwise to begin flow of refrigerant. 7. Remove hose when finished and replace blue protective cap on service port.
  • 1/2" Valve Recharge Hose w Gauge - 13" / 33 cm

    The heavy duty Recharge Hose with Pressure Gauge is suitable for all emzone Refrigerant, Stop Leak and associated products. Use to determine current pressure status of A/C system and ensure accuracy when recharging. The durable brass connectors ensure a safe and secure fit. Includes R134a quick connect. Compatible with R-12 adaptors and A/C Retrofit Conversion Fittings (sold separately).

    ITEM NUMBER   45714
    PRODUCT SIZE   1/2” Tap
    UPC NUMBER   060480 457145
    IMPORTANT: Always wear safety eyewear when servicing your air conditioning system. USE ONLY on low side service port. DO NOT CONNECT to high side service port of system as this could result in serious injury. Instructions: 1. Always connect to low side service port. 2. Refer to can for further instructions before using. 3. Connect tap end of hose to can and attach connector end to low side service port. 4. Ensure a secure fit at both ends of hose. 5. Turn hose tap clockwise to puncture top. 6. Turn hose tap counter-clockwise to begin flow of refrigerant. 7. Remove hose when finished and replace blue protective cap on service port.
  • 1/2" Valve 1234yf A/C Recharge Hose with Gauge - 13" / 33 cm - 45763

    The heavy duty Recharge Hose with Pressure Gauge is suitable for all Emzone 1234yf Refrigerant products. Use to determine current pressure status of A/C system and ensure accuracy when recharging. The durable brass connectors ensure a safe and secure fit. Low side port 1234yf connector. *Available in bulk without packaging - Item no. 45753

    ITEM NUMBER   45763
    PRODUCT SIZE   1/2” Tap
    UPC NUMBER   060480 457633
    IMPORTANT: Always wear safety eyewear when servicing your air conditioning system. USE ONLY on low side service port. DO NOT CONNECT to high side service port of system as this could result in serious injury. Instructions: 1. Always connect to low side service port. 2. Refer to can for further instructions before using. 3. Connect tap end of hose to can and attach connector end to low side service port. 4. Ensure a secure fit at both ends of hose. 5. Turn hose tap clockwise to puncture top. 6. Turn hose tap counter-clockwise to begin flow of refrigerant. 7. Remove hose when finished and replace blue protective cap on service port.
  • 1/2" Valve Recharge Hose w Gauge - 13" / 33 cm

    The heavy duty Recharge Hose with Pressure Gauge is suitable for all Emzone 1234yf Refrigerant products. Use to determine current pressure status of A/C system and ensure accuracy when recharging. The durable brass connectors ensure a safe and secure fit. Low side port 1234yf connector.

    ITEM NUMBER   45753
    PRODUCT SIZE   1/2” Tap
    UPC NUMBER   060480 457534
    IMPORTANT: Always wear safety eyewear when servicing your air conditioning system. USE ONLY on low side service port. DO NOT CONNECT to high side service port of system as this could result in serious injury. Instructions: 1. Always connect to low side service port. 2. Refer to can for further instructions before using. 3. Connect tap end of hose to can and attach connector end to low side service port. 4. Ensure a secure fit at both ends of hose. 5. Turn hose tap clockwise to puncture top. 6. Turn hose tap counter-clockwise to begin flow of refrigerant. 7. Remove hose when finished and replace blue protective cap on service port.
  • 12a A/C Deluxe Recharge & Sealant Kit

    This Emzone kit contains the necessary items to recharge and seal an A/C system efficiently and safely. Contains: -2 Emzone 12a A/C Cool Refrigerants 170 g (6 oz) -1 Emzone 12a A/C Stop Leak 114 g (4 oz) -1 Emzone 12a A/C Recharge Hose -1 A/C Retrofit Conversion Fitting (R12 to 134a) -1 A/C Refrigerant Oil Tester A/C 12a Equivalent Chart

    ITEM NUMBER   45883
    PRODUCT SIZE   n/a
    UPC NUMBER   060480 458838
    See User Reference Guide for additional information and details.
    REFERENCE GUIDES
    DO NOT connect to high pressure side of system as can may burst. FOR QUALIFIED PERSONNEL ONLY.
    Download English SDS
    Download French SDS
  • 12a A/C Recharge Kit including Hose with Gauge

    This Emzone kit contains the necessary items to recharge an A/C system efficiently and safely. This Emzone kit contains: -2 Emzone 12a A/C Cool Refrigerants 170 g (6 oz) -1 Emzone 12a A/C Recharge Hose with Gauge -1 A/C Retrofit Conversion Fitting (R12 to 134a) -1 A/C Refrigerant Oil Tester A/C 12a Equivalent Chart

    ITEM NUMBER   45885
    PRODUCT SIZE   n/a
    UPC NUMBER   060480 458852
    For detailed How-to-Use instructions, download the How-To article. You are also able to zoom into the photos when you click on them.
    Download English SDS
    Download French SDS
  • Refrigerant Oil Injector

    Refrigerant Oil Injector is a premium, screw down injection system with 1/4" Fitting. To inject oil or dye, connect the injector to the low side A/C service port and twist handle. Add snap coupler for R134a use. Capacity range from 1/4 oz. (7.5 ml) to 2 oz. (60 ml).

    ITEM NUMBER   45340
    PRODUCT SIZE   n/a
    UPC NUMBER    n/a
    See User Reference Guide for information and details.
  • A/C Retrofit Conversion Fitting

    A/C Retrofit Conversion Fittings low side adaptor allows for the servicing of older mobile A/C systems and is to be used on the low side A/C service port.
    ITEM NUMBER   45554
    PRODUCT SIZE    n/a
    UPC NUMBER     060480 455547
    1. Turn off engine. 2. Locate low side service port and remove blue protective cap. 3. Attach conversion fitting to low side service port without over tightening. 4. Attached R-134a hose as instructed. 5. Replace blue protective cap when finished.
  • Refrigerant Oil Tester

    A/C Refrigerant Oil Tester is the ideal diagnostic tool to visually display problems or service requirements with A/C systems. With visual results in less than five minutes, the Refrigerant Oil Tester tests the A/C system for sufficient fluid levels and the condition of the refrigerant oil.
    ITEM NUMBER   45346
    PRODUCT SIZE    n/a
    UPC NUMBER    060480 453468
    1. Start vehicle. 2. Once cold, run A/C system for 1 minute. 3. Turn vehicle off. 4. Press the single use Oil Tester to low pressure port 3 times. 5. Check colour USE ONLY on low side service port. DO NOT CONNECT to high side service port of system as this could result in serious injury.
  • 12a A/C Refrigerant Cylinder

    emzone 12a A/C Cool Refrigerant is an environmentally friendly replacement alternative for ozone depleting R-12 and global warming R134a products. It is non-toxic and non-ozone depleting. The 12a A/C Cool Refridgerant also contains high performance oil to improve system efficiency and is system safe. A/C 12a Equivalent Chart

    ITEM NUMBER   45899
    PRODUCT SIZE   5.4 Kg / 12 lb
    UPC NUMBER     060480 458999
    See User Reference Guide for information and details.
    Download English SDS
    Download French SDS
  • 134a A/C Refrigerant

    134a A/C Refrigerant is the current standard refrigerant used in new car, truck and other mobile A/C systems. The 134a A/C Refrigerant was developed for the newer automobile air conditioning systems that have replaced R-12 systems used in older vehicles. A/C 12a Equivalent Chart

    ITEM NUMBER   45929 PRODUCT SIZE   13.6 Kg / 30 lb UPC NUMBER   060480 459293
    Review regulations in your area. Recover any existing refrigerant into appropriate container. Do not mix refrigerants. FOR QUALIFIED PERSONNEL ONLY. Not to be used in R-12 A/C Systems. 1. Existing refrigerant may need to be reclaimed by qualified personnel. Local regulations may vary by region and the technician should be aware of all applicable requirements. 2. Inspect connections and hoses for leaks or damage. 3. Locate low side service port and remove dust cap (usually blue). Ensure service port is clean. 4. Connect gauges and hoses to low side service port. 5. Start engine and turn A/C to maximum cool. 6. Add 134a as required to correct pressure. DO NOT OVERCHARGE SYSTEM. 7. After verifying that pressures and temperatures are correct, remove the charging hose from service port and replace dust cap. 8. The air conditioning system will now operate at cooler inside temperatures. Cylinders must be returned undamaged and in a vacuum state with all valves closed and caps in place to be eligible for credit.
    REFERENCE GUIDES
    Download English SDS
    Download French SDS

Title

Go to Top